Revolutionize Your Microwave: How To Change A Light Bulb In A Kenmore Microwave In 5 Easy Steps

If your Kenmore microwave’s interior is shrouded in darkness, it’s time to shed some light on the situation. Changing the microwave light is a simple task that can be completed in a matter of minutes. Here’s a step-by-step guide to help you restore illumination to your microwave.

Materials You’ll Need

• Replacement microwave light bulb
• Screwdriver (optional)

Safety Precautions

• Unplug the microwave from the electrical outlet before starting any work.
• Allow the microwave to cool down completely before touching any internal components.

Instructions

1. Locate the Access Panel

Most Kenmore microwaves have an access panel located on the top or side of the unit. Look for a small, rectangular or circular panel secured by screws.

2. Remove the Access Panel

Using a screwdriver, carefully remove the screws holding the access panel in place. Set the screws aside in a safe location.

3. Identify the Light Bulb

Once the access panel is removed, you’ll see the microwave’s interior components. The light bulb is typically located near the center of the ceiling.

4. Remove the Old Light Bulb

Grasp the light bulb firmly and gently pull it straight down. If the bulb is stuck, use a screwdriver to pry it loose.

5. Install the New Light Bulb

Align the new light bulb with the socket and gently push it up into place. Ensure that the bulb is securely seated.

6. Replace the Access Panel

Reattach the access panel by aligning it with the screw holes and tightening the screws.

7. Plug In and Test

Plug the microwave back into the electrical outlet and turn it on. The new light bulb should illuminate the interior of the microwave.

Troubleshooting

• The new light bulb doesn’t work: Check that the bulb is properly seated in the socket. If it is, the bulb may be defective. Replace it with a new one.
• The access panel is damaged: If the access panel is cracked or broken, it may need to be replaced. Contact Kenmore customer service for assistance.

Tips for Choosing a Replacement Light Bulb

• Brightness: Choose a bulb with a brightness rating that is comparable to the original bulb.
• Type: Use a microwave-specific light bulb. Regular light bulbs may not withstand the high temperatures inside a microwave.
• Size: Ensure that the replacement bulb is the same size as the original bulb.

Basics You Wanted To Know

Q: How often should I replace the microwave light bulb?
A: Replace the light bulb when it burns out or becomes noticeably dimmer.

Q: Can I use a regular light bulb in my microwave?
A: No, use only microwave-specific light bulbs. Regular light bulbs may overheat and cause a fire hazard.

Q: Where can I find replacement microwave light bulbs?
A: Replacement microwave light bulbs can be found at major appliance retailers, hardware stores, and online retailers.