Unlock The Power Of Your Kenmore Microwave: How To Install It Right

Installing a microwave is a fairly straightforward task that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the microwave is installed safely and correctly. In this blog post, we will provide you with a step-by-step guide on how to install your Kenmore microwave.

Tools and Materials You Will Need

Before you begin the installation process, you will need to gather the following tools and materials:

• Phillips head screwdriver
• Flat head screwdriver
• Level
• Tape measure
• Pencil
• Drill
• 1/8-inch drill bit
• 3/16-inch drill bit
• 1/4-inch drill bit
• Wire strippers
• Electrical tape
• Wall anchors (if needed)

Step 1: Choose the Location for Your Microwave

The first step is to choose the location for your microwave. The microwave should be installed at a height that is comfortable for you to reach. It should also be installed in a location where it will not be obstructed by other appliances or cabinets.

Step 2: Prepare the Mounting Bracket

Once you have chosen the location for your microwave, you need to prepare the mounting bracket. The mounting bracket is the metal bracket that will support the microwave. To prepare the mounting bracket, you will need to:

1. Remove the two screws that are holding the mounting bracket to the microwave.
2. Place the mounting bracket on the wall in the desired location.
3. Mark the location of the two screw holes on the wall.
4. Remove the mounting bracket from the wall.
5. Drill two pilot holes at the marked locations.
6. Insert the two screws into the pilot holes.
7. Tighten the screws until the mounting bracket is securely attached to the wall.

Step 3: Install the Microwave

Once the mounting bracket is installed, you can install the microwave. To install the microwave, you will need to:

1. Lift the microwave and place it on the mounting bracket.
2. Align the two screws on the back of the microwave with the two holes on the mounting bracket.
3. Insert the two screws into the holes and tighten them until the microwave is securely attached to the mounting bracket.

Step 4: Connect the Electrical Wiring

Once the microwave is installed, you need to connect the electrical wiring. To connect the electrical wiring, you will need to:

1. Turn off the power to the circuit that will be powering the microwave.
2. Remove the cover plate from the electrical outlet.
3. Connect the black wire from the microwave to the black wire in the electrical outlet.
4. Connect the white wire from the microwave to the white wire in the electrical outlet.
5. Connect the green wire from the microwave to the ground wire in the electrical outlet.
6. Tighten the screws on the wire connectors.
7. Replace the cover plate on the electrical outlet.
8. Turn on the power to the circuit.

Step 5: Level the Microwave

Once the electrical wiring is connected, you need to level the microwave. To level the microwave, you will need to:

1. Place a level on top of the microwave.
2. Adjust the two leveling feet on the bottom of the microwave until the microwave is level.

Step 6: Install the Trim Kit (Optional)

If you are installing a trim kit with your microwave, you will need to do so now. To install the trim kit, you will need to:

1. Remove the two screws that are holding the trim kit to the microwave.
2. Place the trim kit around the microwave and align the two screws with the two holes on the microwave.
3. Insert the two screws into the holes and tighten them until the trim kit is securely attached to the microwave.

Step 7: Test the Microwave

Once the microwave is installed, you need to test it to make sure that it is working properly. To test the microwave, you will need to:

1. Place a cup of water in the microwave.
2. Close the door and press the “Start” button.
3. The water should start to heat up.
4. Once the water is hot, open the door and remove the cup.

Wrapping Up

Installing a Kenmore microwave is a relatively simple task that can be completed in a few hours. By following the instructions in this blog post, you can ensure that your microwave is installed safely and correctly.

FAQ

1. How do I know if my microwave is installed correctly?

To test if your microwave is installed correctly, you can place a cup of water in the microwave and close the door. Press the “Start” button and the water should start to heat up. Once the water is hot, open the door and remove the cup. If the water is hot, then your microwave is installed correctly.

2. What should I do if my microwave is not working properly?

If your microwave is not working properly, you can try the following troubleshooting tips:

• Check to make sure that the microwave is plugged into an electrical outlet.
• Check to make sure that the door is closed properly.
• Check to make sure that the turntable is rotating properly.
• Check to make sure that the food is not too close to the sides of the microwave.
• If you have tried all of the above troubleshooting tips and your microwave is still not working properly, you may need to contact a qualified appliance repair technician.

3. How often should I clean my microwave?

You should clean your microwave regularly to remove food residue and prevent the buildup of bacteria. To clean your microwave, you can use a damp cloth and a mild detergent. You can also use a microwave-safe cleaner.