Fix Your Broken Frigidaire Microwave: How To Replace The Turntable Motor

Replacing a turntable motor in a Frigidaire microwave is a common repair that can be easily completed with the right tools and guidance. This comprehensive guide will provide you with step-by-step instructions, troubleshooting tips, and safety precautions to help you replace the motor efficiently and effectively.

Materials Required:

• New Frigidaire microwave turntable motor
• Screwdriver
• Socket wrench
• Pliers

Safety Precautions:

• Disconnect the microwave from the power outlet before beginning any repairs.
• Allow the microwave to cool completely before handling any components.
• Wear safety glasses to protect your eyes from flying debris.

Step-by-Step Instructions:

1. Remove the Microwave Door:

• Open the microwave door and locate the two screws at the bottom of the door frame.
• Remove the screws and carefully lift the door up and off the hinges.

2. Access the Turntable:

• Locate the four screws holding the turntable frame in place and remove them.
• Lift the turntable frame out of the microwave.

3. Disconnect the Motor:

• Find the wires connected to the turntable motor and disconnect them.
• Use pliers to gently pull the connector plugs off the motor terminals.

4. Remove the Old Motor:

• Use a socket wrench to remove the nut holding the motor in place.
• Carefully lift the motor out of the turntable frame.

5. Install the New Motor:

• Place the new motor into the turntable frame and secure it with the nut using a socket wrench.
• Reconnect the wires to the motor terminals.

6. Reassemble the Turntable:

• Place the turntable frame back into the microwave and secure it with the four screws.

7. Reattach the Door:

• Carefully align the door with the hinges and lower it into place.
• Secure the door with the two screws at the bottom of the frame.

Troubleshooting Tips:

• If the microwave does not rotate, check if the turntable is properly engaged with the motor.
• If the motor is making a loud noise, it may be defective and need to be replaced.
• If the microwave stops rotating mid-cycle, check for any obstructions or debris around the turntable.

Conclusion:

Replacing a Frigidaire microwave turntable motor is a straightforward repair that can be completed in under an hour. By following the steps outlined in this guide, you can restore your microwave’s functionality and ensure it operates safely and efficiently.

Frequently Asked Questions:

Q: Can I use any turntable motor for my Frigidaire microwave?
A: No, you should use a specific motor designed for your microwave model.

Q: How often should I replace the turntable motor?
A: The lifespan of a turntable motor varies depending on usage. However, as a general rule, it is recommended to replace it every 5-7 years.

Q: Can I repair the turntable motor instead of replacing it?
A: While it is possible to attempt repairs, it is generally more cost-effective and reliable to replace the motor entirely.