How To Replace A Ge Profile Gas Oven Igniter: Fix Your Oven In Minutes!
What To Know
- Open the oven door and locate the igniter at the bottom of the oven cavity.
- Use a screwdriver to disconnect the two wires from the terminals on the igniter.
- Additionally, a faulty igniter may cause a gas odor or a clicking sound when the oven is turned on.
A faulty igniter can leave your GE Profile gas oven cold and unresponsive. Replacing it is a straightforward task that can save you the cost of a service call. Follow this step-by-step guide to restore your oven’s ignition system to optimal performance.
Tools and Materials
- New GE Profile gas oven igniter
- Screwdriver
- Needle-nose pliers
- Wire stripper (optional)
Safety Precautions
- Disconnect the oven from the power supply at the circuit breaker or fuse box.
- Allow the oven to cool completely before beginning any work.
- Wear gloves and safety glasses for protection.
Step-by-Step Instructions
1. Locate the Igniter
- Open the oven door and locate the igniter at the bottom of the oven cavity.
- It is typically a ceramic-coated rod with two wires attached to it.
2. Disconnect the Wires
- Use a screwdriver to disconnect the two wires from the terminals on the igniter.
- If the wires are crimped on, use needlenose pliers to carefully remove them.
3. Remove the Mounting Screws
- Unscrew the two screws that hold the igniter in place.
- Gently pull the igniter towards you to remove it from the oven.
4. Install the New Igniter
- Position the new igniter into the mounting bracket.
- Tighten the mounting screws to secure it.
5. Connect the Wires
- Connect the two wires to the terminals on the new igniter.
- If the wires are crimped, use a wire stripper to expose fresh wire and crimp them on.
- Ensure that the wires are securely fastened.
6. Test the Igniter
- Reconnect the oven to the power supply.
- Turn the oven knob to the “Bake” or “Broil” setting.
- Listen for the igniter to spark and ignite the burner.
7. Replace the Oven Rack
- Once the igniter is working properly, replace the oven rack.
Troubleshooting
- No spark: Check the wires and terminals for loose connections or damage.
- Weak spark: Replace the igniter with a new one.
- Burner not igniting: Ensure that the gas supply is turned on and that the burner orifices are clear of debris.
Wrap-Up
Replacing a GE Profile gas oven igniter is a relatively simple task that can save you time and money. By following these steps and taking the necessary safety precautions, you can restore your oven’s ignition system and enjoy perfectly cooked meals once again.
Frequently Asked Questions
Q: How often should I replace my gas oven igniter?
A: The lifespan of an igniter varies, but it typically lasts for several years. Replace it if it fails to ignite the burner or if it becomes damaged.
Q: Can I use any igniter for my GE Profile oven?
A: No, it is crucial to use the correct igniter model that is specifically designed for your oven. Refer to your oven’s manual for the correct part number.
Q: What are the signs of a faulty igniter?
A: Common signs include no spark, a weak spark, or the burner failing to ignite. Additionally, a faulty igniter may cause a gas odor or a clicking sound when the oven is turned on.
