Say Goodbye To Stuck Microwave Doors: How To Replace The Latch Spring With Ease

If your Samsung microwave door isn‘t latching properly, the latch spring may be broken. Replacing the spring is a relatively simple repair that you can do yourself with a few basic tools.

Tools and Materials

• Phillips head screwdriver
• Flathead screwdriver
• New door latch spring
• Needle-nose pliers (optional)

Safety Precautions

• Unplug the microwave from the power outlet before beginning any repairs.
• Allow the microwave to cool completely before touching any internal components.
• Wear safety glasses when working with tools.

Step-by-Step Instructions

1. Remove the Outer Cover

• Locate the screws on the back of the microwave that secure the outer cover.
• Use a Phillips head screwdriver to remove the screws.
• Lift the outer cover off the microwave.

2. Locate the Door Latch Assembly

• The door latch assembly is located on the inside of the microwave door.
• It is usually attached to the door with two screws.

3. Remove the Door Latch Assembly

• Use a Phillips head screwdriver to remove the screws that secure the door latch assembly.
• Carefully lift the door latch assembly off the door.

4. Remove the Old Spring

• The old spring is located on the inside of the door latch assembly.
• Use needle-nose pliers to carefully remove the spring.

5. Install the New Spring

• Position the new spring on the inside of the door latch assembly.
• Use needle-nose pliers to carefully secure the spring in place.

6. Reattach the Door Latch Assembly

• Place the door latch assembly back on the door.
• Secure it with the screws you removed earlier.

7. Reattach the Outer Cover

• Place the outer cover back on the microwave.
• Secure it with the screws you removed earlier.

8. Test the Repair

• Plug the microwave back into the power outlet.
• Close the door and make sure it latches properly.

Troubleshooting

• If the door still doesn’t latch properly after replacing the spring, check the following:
• Make sure the spring is properly installed.
• Make sure the door latch assembly is properly aligned.
• Make sure there is no debris or damage preventing the door from latching.

The Bottom Line

Replacing a Samsung microwave door latch spring is a simple repair that can be done in a matter of minutes. By following the steps outlined in this guide, you can save yourself the cost of calling a repair technician.

FAQ

Q: How long does it take to replace a Samsung microwave door latch spring?

A: It should take no more than 15-20 minutes to replace a Samsung microwave door latch spring.

Q: How much does it cost to replace a Samsung microwave door latch spring?

A: The cost of a new door latch spring is typically around $10-$20.

Q: Can I replace a Samsung microwave door latch spring without removing the door?

A: Yes, it is possible to replace a Samsung microwave door latch spring without removing the door. However, it is easier to do with the door removed.