How To Take Apart Nutribullet Juicer: The Definitive Guide For Beginners

Maintaining your NutriBullet juicer is crucial to ensure its longevity and optimal performance. One essential aspect of this maintenance is knowing how to take apart your NutriBullet juicer for cleaning and troubleshooting. This comprehensive guide will provide you with a step-by-step breakdown of the disassembly process, making it easy for you to keep your juicer in pristine condition.

Safety Precautions

Before you begin disassembling your NutriBullet juicer, it’s imperative to follow these safety precautions:

• Unplug the juicer from the power outlet.
• Allow the juicer to cool down completely.
• Wear gloves to protect your hands from sharp blades.

Step-by-Step Disassembly

1. Remove the Pitcher

Start by removing the pitcher from the base. To do this, simply lift the pitcher straight up.

2. Unscrew the Blade Assembly

Next, unscrew the blade assembly counterclockwise. Grasp the blade assembly firmly with one hand and use your other hand to turn the pitcher counterclockwise.

3. Separate the Blade Assembly

Once the blade assembly is unscrewed, you can separate it into two parts: the blade and the gasket. The gasket is a rubber ring that sits between the blade and the pitcher.

4. Clean the Blade and Gasket

Thoroughly clean the blade and gasket with warm, soapy water. Use a soft brush to remove any food residue.

5. Unscrew the Filter Basket

Located at the bottom of the pitcher, the filter basket needs to be unscrewed. Turn the filter basket counterclockwise to remove it.

6. Clean the Filter Basket

Clean the filter basket with warm, soapy water. Use a soft brush to remove any food residue.

7. Reassemble the Juicer

Once all the components are cleaned, it’s time to reassemble the juicer.

• Place the gasket on the blade.
• Screw the blade assembly onto the pitcher.
• Place the filter basket into the pitcher.
• Screw the filter basket clockwise.

Troubleshooting Tips

If you encounter any issues while disassembling or reassembling your NutriBullet juicer, refer to these troubleshooting tips:

• Blade assembly won’t unscrew: Apply some WD-40 to the threads and let it sit for a few minutes before trying to unscrew the blade assembly.
• Gasket is stuck: Use a butter knife or a flathead screwdriver to gently pry the gasket out of its groove.
• Filter basket is jammed: If the filter basket is stuck, try turning it in both directions. If that doesn’t work, use a pair of pliers to gently loosen it.

Common Questions and Answers

1. How often should I take apart my NutriBullet juicer?

You should take apart your NutriBullet juicer every few months to clean it thoroughly.

2. Can I put the NutriBullet juicer parts in the dishwasher?

No, the NutriBullet juicer parts are not dishwasher safe.

3. Where can I find replacement parts for my NutriBullet juicer?

Replacement parts for NutriBullet juicers can be found on the NutriBullet website or at authorized retailers.