Troubleshooting The Farberware Deep Fryer: Why It’s Not Working And How To Get It Fixed

If your Farberware deep fryer has suddenly stopped working, leaving you with a craving for crispy treats, don’t despair. Understanding the potential causes behind its malfunction can help you troubleshoot and restore its functionality. In this comprehensive guide, we’ll explore the various reasons why your Farberware deep fryer may not be working and provide practical solutions to get it back in action.

Electrical Faults

Power Supply Issues

• Check if the fryer is properly plugged into a working electrical outlet.
• Ensure the power cord is not damaged or loose.
• Reset the circuit breaker or fuse associated with the outlet.

Heating Element Malfunction

• The heating element may have burned out or become disconnected.
• Unplug the fryer and remove the heating element for inspection.
• If it appears damaged or disconnected, replace it with a new one.

Mechanical Problems

Lid Switch Failure

• The lid switch prevents the fryer from operating when the lid is open.
• If the switch is faulty, the fryer will not turn on.
• Replace the lid switch to resolve the issue.

Basket Release Mechanism

• The basket release mechanism allows you to remove the basket from the fryer.
• If it becomes stuck or damaged, you may not be able to use the fryer.
• Clean and lubricate the mechanism or replace it if necessary.

Thermostat Malfunction

• The thermostat regulates the temperature of the oil.
• If it malfunctions, the fryer may not heat up properly.
• Reset the thermostat or replace it if it’s defective.

Oil Issues

Insufficient Oil

• The fryer requires a minimum amount of oil to operate safely.
• If the oil level is too low, the heating element may overheat and damage the fryer.
• Fill the fryer with the appropriate amount of oil.

Dirty Oil

• Overused oil can become contaminated with food particles and debris.
• Dirty oil can cause the fryer to smoke or produce an unpleasant odor.
• Replace the oil regularly to maintain optimal performance.

Other Potential Causes

Overheating

• If the fryer is used continuously for extended periods, it may overheat.
• Allow the fryer to cool down before using it again.
• Unplug the fryer and let it sit for several hours.

Water in the Oil

• Water in the oil can cause the fryer to splatter or bubble excessively.
• Remove any water from the oil using a paper towel or spoon.
• Dry the fryer thoroughly before using it again.

Improper Cleaning

• If the fryer is not cleaned properly, grease and debris can build up.
• Clean the fryer regularly with hot soapy water and a soft cloth.
• Remove any food particles or grease from the heating element and interior.

Troubleshooting Tips

• Unplug the fryer before performing any troubleshooting steps.
• Refer to the manufacturer’s instructions for specific troubleshooting advice.
• If you are unable to resolve the issue, contact Farberware customer support.

Frequently Asked Questions

Q: Why does my Farberware deep fryer keep tripping the circuit breaker?
A: Overheating, a faulty heating element, or a power surge can cause the circuit breaker to trip.

Q: How often should I replace the oil in my Farberware deep fryer?
A: Replace the oil every 6-8 uses or once it becomes dark and cloudy.

Q: Can I use any type of oil in my Farberware deep fryer?
A: Yes, but it’s recommended to use vegetable oil, canola oil, or peanut oil for best results.

Q: What should I do if my Farberware deep fryer is smoking?
A: Unplug the fryer immediately and allow it to cool down. Clean the fryer thoroughly and replace the oil.

Q: Why is my Farberware deep fryer not heating up?
A: Check the power supply, heating element, and thermostat for any malfunctions.